Replacement Cycles: Malfunction & Innovation

In analyzing the sources of supply & demand for an industry one quickly becomes accustomed to the idea that demand moves in cycles. Economic cycles pervade mainstream economic thinking, so it would be natural to expect demand fluctuating with economic environments. As a result either supply or price also moves in cycles. If supply was fixed and demand cyclical, prices would be cyclical. More realistically, supply reacts to realistic expectations of future demand and prices react upwards, but not as intensely.

In most industries, the primary determinant of cyclicality is the volume of goods sold. Thus, an industry might be called “peak-cycle” if the volume of goods demanded are in excess of normalized expectations.

However there also exists other cycles of demand that impact the volume of goods demanded and their respective prices. One of these alternative impacting cycles is “the replacement cycle” which drives demand through a renewal of parts & products.

The simplest example of a replacement cycle is your consumption of water-heaters. Every time you buy a water-heater, you can expect it to last 8-12 years depending on price. As soon as your water-heater breaks, you either take cold showers or buy a new one. Your individual demand for water-heaters moves in a replacement cycle.

Replacement cycles are driven by obsolescence of products. There can be multiple reasons for obsolescence, each with a different cyclical effect. One reason is product-malfunction. I’ve titled these malfunction-cycles. The water-heater is an example of an individual malfunction-cycle of demand. Another reason can be that the product is now vastly inferior to other goods, leading to a required upgrade. I’ve titled these innovation-cycles, or upgrade-cycles.

Both are examples of recurring demand, which is an extremely positive attribute for any market as it lowers uncertainty, leading to lower borrowing costs and higher stability of income. The effects of each cycle, however, differs vastly based on a series of attributes. Each cycle must be analyzed independently.

The Cycle of Malfunction: Economic Cycles, Smoothing, and Catalysts for Bunching.

The cycle of malfunction on an aggregate level is not necessarily cyclical, despite its name. If the purchase of a new water heater was entirely independent of any other variable, water heater replacements would not show cyclicality. Why not?

Seeing as the purchases were not lumped together, but spread out evenly over time, the replacements also occur randomly across time in non-clustered ways. An example could be an extremely short replacement cycle good (though not malfunction-based) is toothpaste. As users generally buy the same amount of toothpaste independent of economic environment, demographics, weather, or most other things – the replacement cycle is flat in nature, leading to highly sustainable income and a lack of cyclicality. This has a smoothing effect on the economic cycle. While toothpaste is not a malfunction-based good, the lesson is that short replacement cycles and random purchasing can smooth out cyclical effects.

Yet most malfunction-goods have inherent cyclicality. Water-heaters are usually bought during housing booms and are also dependent on demographic patterns in home-buying ages. Water-heater demand therefore generally spikes 8-12 years post housing booms. Luckily a series of housing booms, over time, will create something akin to smoothing, as the demand from each boom follows the next.

Importantly, the length of the replacement cycle results in the recurring demand “popping up” at non-cyclical peaks in the next cycle. The cyclicality of malfunctioning-goods with relation to the economic environment is not necessarily procyclical, but often just cyclical independently of current economic conditions.

Malfunction demand is either smooth across time, or has cyclicality depending on the previous economic cycle. The demand can also be related to the current cycle, if replacement of the product can be temporarily postponed for economic reasons.

Sometimes malfunction-based demand have a catalyst for turning cyclical. Fireman-equipment, such as oxygen tanks, are largely a malfunction-good that generally last 15 years but often require premature replacement on a legislative basis. Except for the occasional budget difficulty, demand for oxygen tanks had an extremely non-cyclical tendency. Recurring demand was smooth across many years as each individual firestation had to replace their gear throughout the year, with no relation to the replacement of other fire-stations.

Then the 11th of September attack in 2001 occurred. Post-attack, George W. Bush Jr. made massive budget allocations to renewing all fireman-gear. This has created a clustered replacement-cycle, as all replacement demand now occurs around the same time, increasing cyclicality in the industry of supplying safety gear to firemen.

To conclude: Malfunctioning goods can lead to highly dependable buying patterns. Sometimes the buying will be constant, sometimes it will follow the last economic cycle, the current one, or be entirely independent of economic cycles as a result of historical events.

When buying companies in an industry with goods that are a “must-have” and last long periods of time, consider how the replacement cycle could look based on common-sense reasoning.

The Cycle of Innovation: Tech-Tock, Tech-Tock.

Some industries have demand for replacing products that aren’t even broken. Crazy, right? Not really.

Many can remember their kids begging for an Iphone instead of a flip-phone, products become obsolete all the time without breaking. Innovation can drive efficiency. With large enough efficiency-gains, consumers and businesses alike will overcome sunk-cost thinking and upgrade.

The presence of an innovation-cycle is mostly apparent in industrial components, not consumer-goods. Consumers will not go out of existence if “operating inefficiently”, but many companies in competitive industries will. Thus a product innovation can lead to forced-upgrading if it’s markedly superior to prior products.

Oftentimes there will be one critical component that forces the rest of the adjacent industries into upgrading. Thus the demand for the producing industry is highly linked to the innovation-cycle. If the cycle of innovation is predictable, companies will even stop replacing old products as they await the newest innovation, leading to a “double-effect” of decreasing demand prior to the innovation and catapulting it post-launch.

The easiest example of innovation-cycles/upgrade-cycles would be the PC upgrade cycle, primarily driven by Intel CPU-releases. The latest was Skylake from Intel. The cycle generally renews every 3-4 years (though wise men expect it to begin growing longer, perhaps 5-6 years). At the end of the cycle companies will be reluctant to expand, thus a changing cycle-length throws considerable uncertainty into the mix.

Cycles often have intra-cycle signs that indicate progress, such as Intel’s previous tradition of first releasing a new microarchitecture, then a new process. Thus, a new microarchitecture was unlikely to be released prior to the new process. There is usually plenty of industry research on a specific innovation-cycle.

When looking at bonds & equities for companies that operate in an industry known for product innovations, especially commercially, approximate the position in the upgrade cycle using “tell-tale signs”.

Conclusion & Takeaways

We’ve hopefully demonstrated that demand can have multiple overlapping cyclical aspects that influence each other. These cycles are important adjustments for considering the price of a business when investing.

In general, recurring demand is an extremely attractive feature, but it heavily affects which attributes dominate in the industry.

In industries with innovation cycles, speed is the name of the game. If you’re the fastest at implementing and getting new innovations out, or the fastest at adapting to new product cycles, you generally win. This promotes engineering talent and R&D as a prime determinant of success.

If your business is based on malfunction, then the speed and ease of replacing the product is essential. Often brands and distribution channels dominate as determinants of success. Thus the marketing and sales organization should be a core focus.

I hope the article was informational. I hope you payment will be sharing the article or commenting with constructive criticism.

Good luck, and good investing.

Matthias Herskind.

 

A Technical Primer For The Waste Industry

Garbage Is, always. We will die, civilization will crumble, life as we know it will cease to exist, but trash will endure” – Robin Nagle, Picking Up: On the Streets...

can-close-up-coke-798638

Photo by Tuesday Temptation from Pexels

The waste industry attempts to earn a profit by removing unwanted side-products from customers. Just as trees produces oxygen as a byproduct so the entire industrial economy produces waste. Government or private industry (most often government AND private industry) have to deal with the disposal of the trash.

A sprawling waste ecosystem emerged as a response to the need for handling garbage properly in the 20th century. The industry was spurred on by regulation across the globe. Every urbanized country in the world has to deal with trash disposal, but each nation has distinct regulation that influences the shape of the waste industry. Laws regarding illegal dumping help landfill volumes, but laws on trash reduction (such as banning straws) hurts landfill volumes. 

The waste industry has a rich and deep history in both the United States and Europe, but the key takeaway is that the waste industry is a byproduct of commercial activity and government regulation. Analyzing waste in any market depends almost entirely on these two factors.

1. The Customers

Waste operators receive trash from a variety of sources and dispose of them. The producers of trash are varied, but in general the production of trash can be tied to commercial activity and consumer spending. The waste industry is, in other words, procyclical. That means that profits in the industry depend on the economic climate. If the economy is chugging along more trash is generated which leads to better conditions for waste companies. 

The customers are varied, but they all produce refuse that they prefer to be handled by outside parties. Below is a very broad categorization of waste industry customers:

123cap.PNG

Waste Volume Contributors, Produced by the author.

The above photo describes the volume contributors in the industry. Almost every company produces commercial waste, but the arrows are meant to illustrate the specific outputs associated with producers.

When waste volume numbers are provided on industry conference calls, they simply represent an aggregation of the above triangles. The above graph is an accurate model, but the goal is to illustrate that the entire “unwanted” output of the economy has to be handled. The waste industry fulfills that need.

The two main groups of trash in the US are residential and C&D (construction and demolition).

Residential trash, often called “municipal solid waste/MSW”, is trash generated by regular consumers. Residential waste is a large volume contributor to the overall waste industry. More importantly MSW is often landfilled. MSW is one of the core drivers of landfill volume. Residential trash often contains a large amount of packaging. Seeing as most packaging is designed for advertising, not environmental concerns, a lot of packaging plastics end up landfilled. Residential trash is impacted by discretionary spending in less affluent areas.

Construction & demolition (C&D) trash refers to waste generated from property development and reconstruction. C&D is a huge volume contributor, but a large percentage (+70%) is recycled. This means that overall waste volumes depend heavily on construction and demolition waste, but that C&D plays less of a role for landfills. The material not recycled in construction & demolition must go to landfills with specific regulatory allowances, generally classified as C&D landfills.

Outside the US the importance of waste streams differ widely. Low-income countries have a high degree of organic waste and generally have low recycling rates, while high-income countries use a lot of paper and recycle more. Other differences include plastics, metals, and regulation on disposal. In many low-income countries a large percentage of waste is still ‘dumped’ in non-disposal areas. 

2. Where Does The Trash Go?

There are several avenues of disposal available. Reuse, recycling, and landfill are the ones most commonly mentioned, but transforming the waste into energy by burning it (abbreviated WtE, Waste-To-Energy) is another possibility.

1234cap.PNG

Waste Industry Disposal Opportunities, Produced by Author.

Reuse is using the existing materials in its current form. Certain types of C&D waste can be scavenged and reused in later projects. Reuse is uncommon for waste operators and not usually associated with scaled commercial activity.

Recycling is the major alternative to landfills. Recycling is defined as taking a material, breaking it down, and using it again. The most advanced vertical in this field is sustainable packaging. Paper is one of the most popular recyclables due to the ease of treatment and active secondary market. When waste operators recycle they earn between 7-20 cents on the dollar in pre-tax profits (EBIT margins), but the activities usually involve little capital investment. This means that waste operators can earn great returns on invested capital, but have a hard time reinvesting money into the business with high returns. Recycling has historically been a volatile field for waste operators as most contracts have been partly based on commodity-prices for recycled goods. 

Waste operators usually derive a material percentage of their free cash flow from Landfills. Landfills are a threatened breed, with material capacity constraints burgeoning in the near future. At the same time the economy and industry is transitioning towards recycling and other disposal methods. Landfills are high in fixed costs, but have great incremental margins (the profit earned on each additional piece of trash landfilled). Not counting the original cost of acquiring the land-plot, Waste Management estimated, in a 2012 investor presentation, that their incremental margins on landfills were in excess of 65%.

Landfills can be inevitable disposal choices as certain materials are simply not economically viable (yet) to recycle. The waste-to-energy process also creates residual products that must be landfilled so a 100% transition to WtE is impossible. It is worth noting that Waste-to-energy can also lead to high-yield metals for recycling. 

In a traditional analysis the disposal methods are the products offered. Customer preferences, complementary products, and margins in the product-offering are extremely diverse.

3. What’s in The Box?

The waste industry takes unwanted trash and disposes of it, but the material must be moved there first.

The waste business is logistics, outsourcing, and “toll-road” economics intertwined. The toll-road economics are present when moving a large supply of trash into a limited supply of disposal opportunities. 

The black-box is the logistics aspect. Collection is a material percentage of sales (+60%) at every waste operator.

12345cap
The black box contains many of the primary expenses. There are two primary sources of costs. Employees and trucks.

Trucks use fuel, require insurance, and require maintenance. Across almost every American waste operator I’ve found that roughly 8-9% of sales have to be spent on maintenance. If any waste company is vastly in excess of this figure they are either dramatically under-utilizing assets, taking low revenue contracts, or operate inefficiently in their maintenance programs.

Labor usually amounts to 7-9% of sales, an assorted mix of costs add a few hundred basis points. Administrative expenses such as sales and back-office tasks (SG&A) usually end up between 11-13% of sales, depending on scale and efficiency. The labor market is tight in the waste industry and wage inflation is usually in excess of inflation-indexes. Employee healthcare costs are a material driver of SG&A, as the mortality rate of working in the waste industry is the fifth-highest in the US.

The black box includes sorting stations for recycling, often called “material recovery facilities (MRFs)”, and transfer stations. Material Recovery Facilities sort materials for recycling. Transfer stations move material from heavy-duty refuse trucks to efficient transport vehicles.

The waste operator compensation for all this heavily depends on geography and asset-mix, but below is an indicative EBIT-margin estimate from Bank of America Merrill Lynch. For non-investor readers, EBIT refers to earnings before interest and taxes.

123456cap

(Source: Bank of America Merrill Lynch, No time to Waste, 2013)

4. Conclusion

You now have a fairly representative image of the waste industry. Including:

  • Why the industry exists,
  • The two major factors that determine how attractive the industry is,
  • Who generates waste, and which sorts.
  • Where waste is disposed,
  • How it gets there, and
  • The margins associated with each link.

1234567cap

The Model

Fully understanding the waste industry takes a lot of work, but the primer above should lay a great foundation.

In upcoming essays we will clearly outline a few intermediate level concepts in the waste space, including:

Feedback appreciated at HerskindAgarwal@gmail.com

Exclusive Markets & Economics of Density

Landline telecommunications […] involve significant fixed costs within each regional market, which are a requirement for economies of scale. These economies have created barriers to entry, protecting the incumbents. Potential entrants would have to seize sufficient local market share to become viable competitors, and the incumbents’ existing degree of customer captivity has made this difficult to achieve.

By contrast, global markets for long-distance telecommunications, film production, recorded music, and books are so large that they will support many entrants, each with a relatively limited market share.

– Bruce Greenwald, All Strategy Is Local.

This essay is one of the intermediate level steps to understand the waste industry as outlined in our primer on the waste industry.  Of the many peculiarities in the waste industry, economics of density & exclusive markets are the most important industry dynamics to comprehend for competent analysis of the waste space.

This essay aims to explain the distinction in market types that waste operators participate in. There have been a multitude of studies on “how waste markets function”, but geographical areas differ widely in trash collection. Context is king when it comes to analysis.

Classification: Natural Monopoly

The waste industry is defined as a natural monopoly by the United Nations Environmental committee.  Below is an excerpt from the 19th page of a UN committee discussing the waste industry:

19

Source.

So what is a natural monopoly? A natural monopoly is when economies of density combined with high asset depreciation ensure that full volume with one operator provides the most efficient solution for stakeholders.

Let me unpack that sentence in layman terms:

  • Economics of density is when a business can provide the same services with the resources by having more customers in one specific geography. Imagine that a neighborhood of 5000 people need to employ guards to patrol their street at night to dissuade criminals. Here are two scenarios that illustrate how economics of density work.

    Scenario 1: Each household uses a different residential guard company. In front of each house, a guard is stationed (5000 guards). Criminals are extremely dissuaded.
    Scenario 2: The entire neighborhood employs a single guard company. The guard company sends out 50 people on patrol each night. Criminals are extremely dissuaded.

    Scenario 3: The entire neighborhood employs a single guard company. The guard company sends out 4 people on patrol each night. Criminals are moderately dissuaded.

    Sending out 50 people to patrol a tiny neighborhood is still extremely excessive, but I wanted to emulate the effect of scenario 1 at a 1/100th of the cost. It should be clear when comparing all examples that a single provider uses the least amount of resources to achieve the desired effect.

  • Asset depreciation is when a business needs to replace expensive equipment to continue operating. If you run a personal taxi service (perhaps through Uber) then you need to replace your car every 6 years. So while each tour might only cost new fuel and personal wages, you still need to earn enough excess profit to cover replacements later on. This is why depreciation is listed on the income statement.In very competitive industries companies with large asset depreciation can often be long-term unprofitable as they are forced to sell their services above immediate cost, but below costs when including the need for replacement.

By having these two attributes the waste sector is much more stable and efficient through communal contracts rather than individual use.

As a result natural monopolies often consolidate customers and bid them in contracts, to ensure that a bidder can be insured optimal volume while still promoting price competition through the auction process. 

To provide a concrete example for economics of density in the waste sector: Imagine 6 areas that need trash collection.

20.PNG

Authors creation. Simplified Model, Economics of Density.

If a collection route has to operate above economic cost (including depreciation of trucks) there are two important factors:

1. How many circles you operate in (keeping utilization high on fixed assets)

2. Keeping the length of lines to a minimum (keeping variable costs low)

Below are two images that contrast potential solutions.

21.PNG

Authors creation.

It should be clear why the entire waste industry operates on contracts. This is one reason why waste operators generally consolidate areas over time, and the reason that operators are generally densely focused in terms of geography. Only the big players have nation-wide operations.

There is an important caveat to above model that illustrates the first major industry dynamic. Only certain markets have economics of density. Whether a market benefits from economics of density depends on the volume in each market. 

Volume & Economics of Density Explained

There is only a certain amount of space in a garbage truck. If a truck could be filled from one circle there would be no regional economies of scale.

In Bruce Greenwalds book Competition Demystified he outlines how a supermarket in a rural town will have complete dominance. There is simply not enough demand to sustain two supermarkets, so nobody attempts to enter. However a metropolis will have enough volume to sustain multiple supermarkets who will have to compete on prices.

The same is true in the waste market. De-minimis size requirements make isolated markets attractive. If (in our illustrated example) each circle had enough trash to sustain a whole operation, there would be no economics of density. As such there would be regular price competition.

When operators who focus on exclusive markets, such as Waste Connections (NYSE:WCN), acquire urban contracts the EBITDA-margin is at least 500 basis points lower. 

The team at Waste Connections generally include the following slide in their presentations.

22.PNG
Source: Page 5.

We cover integrated versus non-integrated in our article on: “How Landfills Drive Consolidation”

The table clearly shows that exclusive markets are preferable to competitive markets. As explained above “exclusive markets” simply means that the areas are rural enough that regional economies of scale manifest themselves.

What Does This Mean for Investors & Entrepreneurs?

For investors it is important to recognize that margins are not comparable across companies with different market compositions. In the United States operators such as Waste Connections have margins in vast excess of peers such as Republic Services or Waste Management, but not because the other two have inefficient management. One cannot simply expect margin differences to close or use them as arguments for return to the mean.

Investors should also consider if rural markets will turn urban or enough people will migrate to make rural markets less attractive over time. Investors should keep market-composition in mind when setting margin-targets for companies that haven’t realized full utilization on assets.

For entrepreneurs the exclusive/non-exclusive market paradigm illustrates what both companies and customers are interested in. Waste operators are interested in purchasing solutions that solve volume-issues in urban areas.

Customers, such as municipalities, are interested in making bids competitive in rural areas. The task is vastly more difficult for an innovator here, but could include alternative logistics solutions or software that optimizes consolidation of municipalities for contract-offerings.

Most of all both investors and entrepreneurs need to comprehend what drives profitability and market paradigm for businesses and customers alike.

 

A Primer On The Staffing Industry

Human resources are like natural resources; they’re often buried deep. You have to go looking for them, they’re not just lying around on the surface. You have to create the circumstances where they show themselves

– Ken Robinson

This is Herskind & Agarwals primer on the staffing industry. For deeper insights read our essays. The primers goal is to introduce the space to investors, entrepreneurs, and laypeople. With a mixed demographic, certain terms may be unclear. Questions are therefore encouraged in the comments.

Since we provide this article at no cost or paywall, consider leaving your feedback as payment at: HerskindAgarwal@gmail.com

Defining the Staffing Industry

The staffing industry is quite easy to define. It primarily holds one type of company: Staffing agencies.

Staffing agencies connect companies with a temporary workforce. A staffing agency uses labor, through recruiters, and brand-name to attract potential employees. The agency also attempts to demonstrate to companies that they can provide superior talent, faster, and cheaper than internal HR. Thus the primary competition for staffing agencies consist of in-sourced corporate recruiting.

The staffing agencies are the original platform businesses. As such they also compete with (and utilize) the modern labor platforms of today such as LinkedIn and Indeed.com.

RecruitHoldings.PNG

Description of the staffing space by Recruit Holdings’ 2017 Annual Report.

Why Do Staffing Agencies Exist?

Getting a job can be hard. Most jobs either don’t fit your needs, are extremely crowded, have extreme requirements for prior experience or low compensation. Sometimes several of these ‘unique attributes’ combined. Even the most ambitious individuals can burn out while applying for hundreds of jobs.

On the other hand hiring is almost equally difficult. You have to sift through hundreds of CV’s with various formats, deciphering which candidates make true claims and where the information provided is less accurate. Even worse the process of finding, reaching, and attracting the proper talent pool takes time and money before the process even starts.

Sometimes that workload is worth the trouble. Consider having to put together a new department for supporting your sales teams. You would have to comprehend how the sales team is currently structured and what the corporate goal is with the support function. Furthermore the entire team would have to work together, which requires deeper insight than simply adding one team member. An HR department shines in that scenario.

Other times the trouble of sifting through potential hires is not worth the effort. If you need 200 people to move boxes from one spot to another the work is homogenous enough that reaching the employment pool is the difficult part. If you need a chemical engineer for 3 months to handle a single project, a large part of the search costs come from simply finding and contacting potential employees. Many project-type employees wouldn’t even consider a 3-month employment status in an isolated case.

This is where staffing firms provide utility. By reducing search costs for both employees and employers, while providing consistent project-based work for niche employees, the companies earn a fee. Employment agencies, as they are often called, work as brokerages. Putting potential employees and potential employers in contact, all while taking a fee. They reduce search costs at both ends of the spectrum.

But staffing agencies are more complex than they look. There are several types of placements, each with a distinct financial and operational profile. Agencies often integrate themselves into their customer companies in various capacities and there are several mega-trends that will fundamentally change the industry in coming years.

When trying to invest or build in the employment space the first crucial step is to understand the current ecosystem.

Which Services Do Staffing Agencies Provide? 

Staffing Agencies provide a wide range of services. Many of the larger agencies have branched into traditional human resource management, but in this primer we focus on the core staffing agency services.

They can be broadly categorized as:

  • Traditional staffing which entails temporary placement of low-skill labor.
  • Specialist staffing which entails temporary placement of skilled labor.
  • Permanent placement fees.

Traditional staffing contracts often come at high volumes and with long-term commitments from both sides. The industries served are often seasonal and high turnover by nature. The take-rate for traditional staffing are low for two reasons:

(1) Little room for differentiation. The jobs are fairly commoditized so price competition is intense. It’s hard for companies to see how staffing agencies can add any value besides low price and expediency.

(2) The high-visibility of sales make the contracts attractive which creates more competition. Highly visible sales lead to cheaper financing (and therefore less money paid to the bank). Staffing firms need less compensation for a reliable income stream.

The staffing agency is paid a percentage of the employees wages, usually referred to as a take-rate.

Specialist staffing contracts often focus on skilled labor spaces such as IT, engineering, finance, or medical services. The work can be projects or a test-period for permanent employment. The full compensation therefore often depends on their temporary workers being hired full-time. The specialist business is also more cyclical as much of the work is capital expenditures for improving the business, whereas traditional staffing is often operating expenditures to keep the business going.

The cyclical nature and lack of long-term visibility generally leads to a higher take-rate for the staffing agencies.

The staffing agency is paid a percentage of the employees wages. In addition a  fee is paid when a temporary employee is hired by the customer company. These fees are called ‘permanent placement fees’.

Specialist staffing carries higher stakes for customers. In the book ‘Who‘ by Geoff Smart it’s estimated that a wrong hire costs 15 times the employee base salary. Employing the wrong engineer could easily be a $1.5 million dollar mistake. Thus specialist staffing firms require higher credibility.

Permanent placement fees constitute the 2nd component of specialist staffing fees, but can also be relevant in traditional staffing. If a company decides to hire the contingent/temporary workforce permanently they have to pay a fee to the staffing agency. Seeing as the agency has to do no additional work (besides potentially paying a bonus fee to the hired employee) the permanent places fees can be extremely lucrative on a income-statement profitability basis.

Staffing firms have also begun to integrate themselves into payroll processing and other HR functions, but that is an entirely separate discussion. The core service remains placing workers with businesses.

Industries Served & End-market analysis.

The business of connecting workers and companies relies on a suitable economic climate. That makes the business slightly procyclical (it moves in tandem with economic development),  but what really determines the level of cyclicality is which end-markets the agency serves and in which capacity.

An end-market is a term for the category of your customers.

The end-markets for traditional staffing is often retail, warehouse, construction, or manufacturing jobs. All industries rely heavily on the well-being of the economy when hiring. Luckily the services provided are often essential for the company so firing the laborers entirely is almost impossible.

The end-markets for professional staffing are often less cyclical, but the nature of the work is often very dependent on the economic cycle. Far from cancelling out the professional staffing segment is more reliant on a positive economic environment as permanent placement fees depend heavily on an expanding labor base and often decrease materially volume-wise in recessions.

Be sure to analyze the end-markets of any corporation you analyze or interact with to determine their position in a recession.

An average staffing firm will derive roughly 50% of its sales from industrial staffing jobs, 25% from service-related staffing jobs, and 25% from professional staffing jobs (of which the majority will be IT-related).

Statistics on The Staffing Agency 

We’ve covered what staffing agencies do, why they’re needed, how they earn a profit, and how the composition of customers influence risk during a recession.

The next step is to grasp a few basic numbers. Let us first look at the United States.

According to the American Staffing Association the staffing industry had total wages paid of $161 billion in 2017. With a take-rate of 15% that amounts to a total market size of ~$25 billion for staffing firms. Roughly 80% of the market is temporary staffing, while 20% of the market was professional staffing aimed at permanent placement.

The ~$25 billion dollar market has 20,000 staffing companies. Roughly 50% of companies are in the temporary and contract staffing space. Combined with the knowledge above the implication is that there are a lot of fragmented specialist firms and fewer, but larger, temporary staffing firms.

Staffing firms employ roughly 2% of the U.S. nonfarm workforce.

On a global level the staffing industry produced $428 in wages in 2016 which amounts to a +$60 billion dollar market on a global scale. This implies that even the largest firms such as Adecco only posses a ~5% market share. The industry is clearly fragmented.

From a laborer point of view the agencies are often a way to get a permanent job. 49% of staffing employees openly state that permanent placement is their goal. 35% of employees have been offered a permanent job and the acceptance rate is 66%. The average temporary placement wage is $17 per hour in the United States.

The Unit Economics of The Staffing Industry 

So what does an actual temporary employee result in financially? Take the $17 per hour average above as an example.

The $17 average wage would be billed as $26.35 to companies. Why? There are a few pass-on costs such as legally mandated labor costs (WC, SUTA, FUTA, FICA) that amount to $3.34 in total. This leaves a discrepancy of $6.01. This is the gross profit / take-rate for the staffing agency.

$4.93 go to general and administrative expenses. The vast majority goes to employees, but costs such as offices, marketing, and research costs often grow slower than sales, leading to expanding margins with volume. The fixed costs amount to roughly ~20% of the administrative costs. That means only ~$4 actually go to the variable expenses related to the employee hired.

That leaves $2 of profit per $17 of wages received (for incremental EBITDA margins of ~12%). The staffing agency then has to pay interest and other corporate taxes along with fixed expenses. The fixed expenses tend to be fairly variable in the long-run which means that most profit margins (even with large, scaled agencies) end up below 6%.

In the example above there is a profit of $1.08 when you include fixed costs. That amounts to a 6.3% profit margin. Considering we still need to pay interest and a few additional taxes it’s easy to see why few firms manage to break +6% profit margins consistently.

Those are the economics of the industry on a micro level. On a macro level the industry is slightly more complex.

Industry Dynamics: What Staffing Is Really About

There are a few key dynamics to understand.

  1.  The limited scope of control,
  2.  Human Resources – horizontal integration,
  3. Technology implementation.

(1) The first key dynamic is the impossibility of trying to improve the product or change inventory. Employees won’t change their personality to accommodate a recruiter, nor will a 3-week app education materially contribute to their skills.

That also means the sphere of influence for improvement is quite small. You cannot improve your product (make it better, make it cheaper). You cannot charge more to customers (non-captive customers). The only control you have is pure corporate efficiency. The less rent, employee costs, and marketing you need to succeed the higher the profit margin and the more effective incremental volume will be.

That means succesful staffing firms are fiendishly focused on reducing overhead. The most succesful approach I’ve seen has been Japanese Recruit Holdings. They utilize a decentralized corporate strategy where each department manager holds a large responsibility for costs. This reduces bureaucracy and increases autonomy. Recruit has best-in-class margins and I expect competitors to increasingly adopt the model over time.

An alternative has been to consolidate everything into a common back-office enhanced by technology. For now the strategy has not been succesful, but with a new age in tech the plan could work out long-term.

Not all staffing agencies are focused on remaining lean, but succesful ones are.

(2) Staffing is largely a commoditized space which makes operators branch out into more attractive adjacent verticals.

The easiest example is when agencies manage payroll services for companies with a large contingent workforce. Since staffing agencies already handle the temporary staff payroll, why not take over the remaining services for synergistic purposes? While the staffing agencies generally deliver the services at a lower price than pure-players, the integration of payroll services deepens the partnership between staffing agency and customer. The partnership increases switching costs on the staffing side while providing a steady source of high-margin income on the payroll side.

One of the most popular verticals for integration is recruitment process outsourcing (RPO). Despite the overly complicated name the service is straightforward. The staffing agency takes over the full recruitment process for their customers. Seeing as the staffing agencies are constantly monitoring the specialist talent pool there are scale advantages to managing multiple talent acquisition divisions across companies.

Staffing agencies offer a multitude of similar services. Each cover a HR service that is partly associated with a temporary workforce. Most have a different margin profile from traditional staffing, which should be considered when comparing margins across companies. For a full example of the breadth achievable I recommend researching Randstad.

(3) Another attempt at differentiation in the world of staffing is the continued integration of technology. Large firms like Adecco have spent hundreds of millions on attempts to implement technology into their recruitment process. The space for technology aimed at staffing agencies is quite attractive (from an entrepreneur perspective) as most staffing agencies are generating mountains of cash with no easy redeployment opportunities.

Some companies simply attempt to use new tools for old processes. An example would be AI for identifying good recruiting opportunities or apps that keep track of your work-week for you.

On the other hand a few truly innovative companies, such as TrueBlue, have attempted to build entirely new structures. Trueblue attempted a brief foray into this with their JobStack app. With JobStack you have the ability to see jobs in your vicinity and apply based on your profile at TrueBlue. While the application still relies on a centralized system (TrueBlue) it’s an interesting foray into technological adaptation. The project could potentially connect staffing agency customers with the network of people looking to join ‘the gig economy’ through a formalized channel.

The adoption of technology will fundamentally change the economics of the business. Whereas the current unit economics (as demonstrated above) are highly variable and largely scale with use (the $4 of administrative costs), the unit economics in a tech world would require little variable expenses, but heavy investments into research and marketing. This will mostly benefit larger operators.

Summary and Putting It All Together

The staffing business is a brokerage business between employees and employers. Staffing agencies fulfill a series of needs, from high-volume low-skill labor to specialist IT work. Each type of service has its own margin-profile and growth runway.

The staffing agencies suffer from a commoditized product. The solution has been to try and integrate higher skill services along staffing offerings. Most staffing firms are turning partly into HR firms. Each staffing firm has a unique risk profile based on which type of service they provide (cyclical project-based work or consistent low-skill work) and to whom (cyclical industries versus stable industries).

What To Read Now

Having gone through this document you’ve hopefully acquired a foundation for comprehending how and why staffing agencies make money. The next step is to learn a few intermediate concepts, depending on your end-goal.

If you goal is to invest in the industry we highly recommend our essay on the accounting for staffing firms. It explains why people (even from prestigious publications like Forbes, Nasdaq) often hype or pass up on investing in staffing stocks due to not having full comprehension of the accounting employed. The essay is titled “How Accounting Distorts The Staffing Industry

No matter what your goal is you need to comprehend the growing importance of automation. The best source of information is a recent McKinsey Global linked here. It explains the timeline and scope of automation well.

If your goal is to build tools for the staffing industry, we recommend looking at what projects have currently been acquired by Adecco, including Vettery and JobPilot. We also recommend looking at the recent technology from TrueBlue, an industry leader at implementing technology.

The most popular startup strategy seems to be a clear focus on a small, but coveted, pool of laborers. Focusing on the labor/supply-side is currently the strategy for most recruitment platforms.

If you plan to work in the industry there exist a few “recruiting handbooks” on Amazon. None of them have proven very insightful. For professional staffing the major trends seems to be comprehending the new recruiting landscape (I recommend “Social Media Recruitment” by Andy Headworth) and how important your function is. The best book for all around insight is in all likelihood ‘Who‘ by Geoff Smart. The book is based on interviews with over 300 CEO’s and proposes a structured attempt at finding & hiring the best people for the job.

 

How Accounting Distorts The Staffing Industry

And he read Principles of Accounting all morning, but just to make it interesting, he put lots of dragons in it. ― Terry Pratchett, Wintersmith

Accounting is a wonderful tool for understanding a business. It outlines the amount of capital employed, how the capital is financed, the amount of cash the business is producing, and illustrates expenses across all levels of activity.

Yet accounting can also be treacherous. Revenue can be front-loaded, expenses can be capitalized, and a thousand other tricks can lead to a mirage for investors.  There are multiple tools to counteract these mirages. Cashflow awareness, footnote diligence, and a broad knowledge of accounting all reduce the risk of miscomprehension.

Like any tool accounting is great if you have control, but a lack of comprehension or focus leads to danger.

In the staffing industry the unique accounting related to sales & profitability lead to a wide range of misconceptions both when screening for the stocks and when judging investment merits. I’ve heard multiple times that staffing had too low margins to be an investable business. I’ve also heard that the Price-to-Sales ratio indicated a good purchase on many staffing stocks.

Below is a small compilation of times that not knowing the accounting on staffing revenue would have led to overlooking or overestimating staffing stocks.

14.PNG

Produced by Author. Sources range across 5-10 investor-focused articles from major websites such as Forbes, Nasdaq, etc. 

The Business and Accounting of Staffing Agencies

The staffing business is at its core a brokerage business. As covered in my primer the business centers on joining individuals seeking temporary placement and corporations seeking a temporary workforce for several reasons.

Regular brokerage businesses carry transaction volume as a separate footnote or line item and the take-rate is revenue. If you want a boat and I introduce you to my friend who owns one in exchange for a $200 commission, brokerage accounting would have $200 as sales while traditional retailers would carry the whole boat as sales (seeing as they carried it at cost in inventory).

Visa and Mastercard don’t carry total transaction volume (in the trillions) on the income statement, only their >0.5% take. Online brokerages such as Ebay carry their “bite of the cake” as net revenues and show gross merchandise value in footnotes. Actual stock brokerages use the same model.

For sales almost every brokerage model doesn’t use the gross transaction volume, but only the slice that ends up at the firm. Investors could be excused for assuming that staffing would operate similarly, but it doesn’t.

Staffing sales are counted as the total wages paid to the employee. That includes employee wages, workers’ comp, federal unemployment, state unemployment, health, and insurance costs. Gross profit is the take-rate of the staffing agency. The categorization of payments leads to the what should be sales ending up as gross profit.

The sales of staffing agencies are in effect the GMV of online retailers, the transaction volume of card networks, or the total sums managed by brokerages. The gross profit constitutes the true sales.

How the Accounting Distorts Screening and Cross-industry comparisons.

As the sales of staffing agencies include ALL the wages paid to their placed temp. staff, the margins are extremely thin and the price-to-sales ratio is equally low.

For investors focused of net profit margins (as demonstrated in the top image) this might lead to categorizing staffing firms as ‘dogs’ and commoditized. Many investors have minimum requirements for margins which is extremely rational. It is traditional micro-economic theory and investment considerations (from the time of Graham) that the lowest cost manufacturers (lowest margins) are leveraged towards commodity prices.

It is entirely reasonable to avoid certain commoditized, low-margin business models, but not when they’re only optically low-margin due to an accounting exception.

For investors focused on low price-to-sales (as showcased in the photo above) the unnatural accreditation of sales will result in a seemingly “value-style” stock on a revenue basis.

The low margins might inspire false confidence as I’ve heard from some commentators on manned security and staffing agencies. They will argue that margins are so low that nobody wants to disrupt or compete. In reality the margins at some firms are in line with most industries today on an adjusted basis.

On the other hand I’ve seen arguments that certain aspects of staffing that doesn’t involve employee wages, such as recruitment process outsourcing, will face contracting margins because they’re so “attractive” when compared to staffing revenues.

All of these arguments are entirely invalid based on traditional accounting measures. My argument isn’t that staffing stocks are likely to be under- or overvalued as a result of this phenomenon.

My comment is simple: Be extremely wary if you see an argument related to margins or price-to-sales of staffing stocks.

Staffing Companies on an Adjusted Basis

I’ve tried to summarize the difference in a comparison between a “normalized” income statement and the status quo income statement.

17.PNG

(1) An adjusted Income Statement contrasted with the current version.

While the absolute numbers are the same (e.g. both versions would end up at the same absolute profit figures) the inclusion of wages in sales and cost-of-goods sold severely disrupts any investor screen aiming at “high-margin” companies.

Further Complications

So you’ve learnt how staffing accounting differs widely from what is usually applied to brokerage-type businesses. That means you’re ready to go screen for the best staffing companies.

Not so quick young buck.

There is yet another complication. Staffing companies often derive income from permanent placement fees/direct hire fees. Direct hire fees are charges to staffing agencies for finding an employable candidate.

15.PNG

An explanation of Direct Hire Fees from Talent Plus Staffing.

Direct hire fees don’t have the wage component in goods of goods sold. Aforementioned means it’s extremely high gross margin as most of the expenditures are based in operating expenses.

Direct hire fees are good examples of products that should be treated as direct revenue. As the two different fees mix, it skews the gross-margin upwards. Be aware of this fact when comparing margins across companies within the industry. Industry-relative comparisons are disrupted by direct hire fees not being treated like pure staffing revenues.

With that last explanation in mind you’re now cognizant of the intricacies surrounding staffing margins. Go and impress some girls at the bar with it!